Tools & Tool Manuals
High-quality manifold gauges are essential for reading system pressures and performing recovery/recharge operations.
- Red hose: High pressure side
- Blue hose: Low pressure side
- Yellow hose: Recovery/recharge
- Pressure ranges: 0-500 PSI high, 0-150 PSI low
Refrigerant recovery is required by EPA regulations. The Mastercool 69110 is commonly used for Bobcat service.
- Recovers refrigerant without venting
- Separates oil from refrigerant
- Meets EPA 608 certification requirements
- Required for all AC service work
Used to evacuate air and moisture from the AC system before charging with refrigerant.
- Creates deep vacuum (500 microns or less)
- Removes moisture from system
- Essential for proper system operation
- Typical evacuation time: 30-60 minutes
Precision scale for measuring refrigerant quantity during recovery and charging operations.
- Accurate to 0.1 oz
- Required for proper charging
- Tracks recovered refrigerant amount
- Essential for documentation
Various methods for detecting refrigerant leaks in Bobcat AC systems.
- Electronic leak detectors (UV or heated diode)
- UV dye and black light
- Soap bubble solution
- Nitrogen pressure testing
Infrared and contact probes for measuring temperatures during AC system operation.
- Infrared non-contact works well for duct temps
- DVOM temperature probes work well for condenser and evaporator temps
Operating manual for the Mastercool 69110 refrigerant recovery system.
Operating manual for the OMT manifold gauge set and vacuum pump.
Reference guide for the Yellow Jacket electronic refrigerant scale.
Keep all tools clean and calibrated. Replace hoses that show signs of wear or damage. Store equipment in clean, dry conditions to prevent contamination.